New SDX Flybared EP Kit Announced by Hirobo:
SDX EP SWM KIT w/o Blade
- Length: 1,220mm
- Width: 186mm
- Height: 395mm
- Main rotor diameter: 1,348mm
- Tail rotor diameter: 258mm
- Gear ratio: 8.7:1:4.71
- Weight: 3,400g
- Motor: Hirobo Scorpion 740kv motor
Features (only with EP kits)
740kv Hirobo-Scorpion motor with motor mounts included.
Features (Also common with GP SDX)
FZ-5 rotor head
This rotor head is our answer for every helicopter flyer, from novice to
top-level 3D and F3C pilots.
Higher stability should give more confidence to beginner pilots for their first practice.
The head reacts to any slight stick movement, moving precisely as stick inputs.
For maneuvers, the machine tracks straight as in airplane flight. For loops and
rolls, the heads reacts linearly, resulting in beautiful maneuvers in the air.
For 3D maximum pitch stroke is 30°, same as SSZ-4 head from Turbulence.
With new design swashplate, approx 60% more cyclic range possible compared
with previous design. The SDX is perfect model to start practicing 3D, up to
the top competition level. The head design will not cause binding with any
maneuvers, while you can enjoy 3D world champion performance.
Selectable SWM linkage
This swashplate has larger inner bearing(25mm). 120 (left) and 135 (right)
SWM linkage are selectable. This model is SWM only and HPM is not available.
5mm tail housing from 90 size Turbulence D3 are used. 2pcs 5mm thrust bearing,
4pcs radial bearing included. Double pin supported tail pitch system used for
more precise tail control. The tail is belt driven with shaft drive option (0412-162) available.
Sold separately (Not included in kits)
ESC: More than 75A for 8S Lipo (29.6V) with OPTO
Batteries: 4S 14.8V 4,000mAh 20C or better 2 sets
(Max size: 50x57x160mm)